Overview | Search Downloads | Submit file | Up |
Category: Multirotors | ||
AutoG2 Version:0.86 |
|
Experimental first draft for the Durafly AutoG2 (NO MODEL HAS FLOWN WITH THIS) |
Created Size Downloads |
2015-01-22 77.03 KB 2145 |
||
Blade 350 QX3 AP Combo Version:3 |
|
Fully Functional - 5 Flight Modes, Smart, AP, Stability, Agility and RTH
Gimbal Control and Panoramic Mode
See Mirror File For Full Instructions |
Created Size Downloads |
2015-01-03 391.85 KB 2872 |
||
Taranis, 3DR Pixhawk, 7 flight modes, FM sound |
|
Yet another quadcopter configuration for Taranis transmitter and 3DR Pixhawk FC.
Created |
2014-09-18 77.03 KB 3458 |
||
Quanum Nova / CX-20 |
|
Here is 6 flight mode setup that I used. Originally posted by xtagon on rcgroups here. Check the link for a good explanation of the flight modes and switches. Only additions I have are below. I setup audio files to play for the modes I have selected when they are toggled. Channel 6 & 7 setup for my gimbal. .... |
Created Size Downloads |
2014-12-22 77.03 KB 2488 |
||
250 quad with Thunder KK Pro Flight Controller Version:1.0 |
|
This is file for a 250 quad using a Thunder KK Pro flight controller and a Spektrum Satellite. Very basic with 2 flight modes. Good file to start with. Thanks, |
Created Size Downloads |
2014-10-17 77.03 KB 2320 |
||
Pixhawk, 6 flight modes, expos, rates + |
|
This is used on a AD1 quad. Taranis with x8r in D16 mode, 16 channels. Frsky lipo monitor. Have 3 rates and different expos on all three. 6 flight modes, RTL ch7 and Auto tune ch8. Led lights with steady and blinking by timer ch10. Amber sounds installed. Logical switches and special functions to call out flight modes, and battery info. |
Created Size Downloads |
2014-11-02 77.03 KB 2941 |
||
v929 |
|
v929 |
Created Size Downloads |
2014-04-06 77.03 KB 2256 |
||
v939 |
|
v939 |
Created Size Downloads |
2014-04-06 77.03 KB 2242 |
||
Walkera QR X350 Pro w/G-2D, telemetry, sounds Version:1.0 |
|
Basic Taranis setup for the Walkera QR X350 Pro quad. D/R, telemetry, gimbal control. Sounds and model image included (could be improved on...). I am using the D8R-XP receiver (board removed from the case), S-Bus (CPPM) connection to the FC, and a analog Voltage Sensor on A2. Channels 6 and 8 (gimbal control) are connected from the analog channel pins on the receiver to the gimbal .... |
Created Size Downloads |
2014-04-13 396.66 KB 1894 |
||
Blade 200 QX |
|
Sticky Throttle, Proper throws to enable arming. |
Created Size Downloads |
2014-11-13 76.03 KB 2456 |
||
TBS Discovery Pro Version:1.1 |
|
DJI F450 + Zenmuse Naza V2.1 Taranis Setup - Sound Version:2.1 |
|
Blade nQx (01.2014) Version:1.0 |
|
Sticky Throttle Hold |
Created Size Downloads |
2014-01-03 77.03 KB 2495 |
||
Naze32-Basic Version:1 |
|
Basic setup for Naze32 - Aux1=SE, Aux2=SG
|
Created Size Downloads |
2013-12-23 76.03 KB 2615 |
||
Blade 350qx Version:v1 |
|
Blade 350qx backup file with fail safe and all 3 modes |
Created Size Downloads |
2014-03-20 32.14 KB 1910 |
||
TBS Discovery w/Naza Custom Switches |
|
File for TBS Discovery w/Naza and custom switches w/voice |
Created Size Downloads |
2014-02-20 77.03 KB 2397 |
||
Head tracker controlled NAZA Quad Version:1.0 |
|
MultiWii MWC 6-channel Version:1.0 |
|
MultiWii 6-channel setup with telemetry |
Created Size Downloads |
2013-08-27 76.03 KB 2563 |
||
DJI NAZA w/ extras! Version:2.0 |
|
Simple KK2 setup Version:1.0 |
|
Simple config for a KK2-based multicopter with A2 main-battery voltage monitoring. |
Created Size Downloads |
2013-08-31 77.03 KB 2563 |
||
Camera gimbal control Version:0.1 |
|
This is an example showing camera gimbal control with the aileron/elevator stick when SG is set to the middle position.
This has a basic MultiWii style throttle kill (zero throttle, left yaw) and will need to be adapted for other flight controllers or settings. |
Created Size Downloads |
2013-09-01 76.03 KB 2269 |
||
6 POS switch mixing Version:1.1 |
|
6 Pos switch for APM or alike |
Created Size Downloads |
2013-09-30 77.03 KB 2605 |
||
Arducopter 4S Version:1.1 |
|
DJI Naza and Phantom Version:1.0 |
|
Model Setup for DJI Naza-m also tested on a DJI Phantom. |
Created Size Downloads |
2013-07-29 77.03 KB 3287 |
||
WLToys V939 Version:1.1 |
|
Uses FlySky TX module. Rates are set at 75% to disable the "auto-flip" mechanism. |
Created Size Downloads |
2013-06-24 76.03 KB 2260 |
||