 Overview |
 Search Downloads |
 Submit file |
 Up |
| Download details |
 Eleven Models Version:2-15-2014  |
||||||||||||||||||||
|
Lucky Lady - Modified AstroHog is a low wing model with a 72” wingspan, OS 70 Surpass engine, and Flaperons. - Timer 1 & 2 set with THs - THR is set up with a curve to take advantage of full servo movement - SC is used for Triple Rates and Exponential for RUD, AIL and ELE. Expo set at 30%. Rates at 100%, 80%, and 60% - Mix using SB is used for Flaperons with rates at 100%, 75% and 50%. Slow 2 seconds. - Mix using SG is used for THR-ELE mix providing up to 15% ELE as THR increases - Mix using SE is used for THR-RUD mix providing up to 10% right rudder as THR increases - Mix using SH is THR cut - CHL 1, 2, and 4 are inverted - Custom Switches CS2 and CS3 are set as mixes to delay reading of track in mid positions unless mid position held for 0.5 seconds. - S1 used as volume control - SHs used to reset timer (in addition to THR Cut)
DE Havilland Beaver - Electric foam model is a high wing with a 59.5” wingspan and flaps - Timers are set with CS1 which does not start the timers until THR is on at least 5% - SC is used for Triple Rates and Exponential for RUD, AIL and ELE. Expo set at 30%. Rates at 100%, 80%, and 60% - Mix with SB is used for Flaps with 2 second slow feature - Mix using SG is used for THR-ELE mix providing up to 15% ELE as THR increases - Mix using SE is used for THR-RUD mix providing up to 10% right rudder as THR increases - CS2 is set to prevent playing track Flaps 50% unless SB- is held for at least 0.5 seconds - CS3 and CHL 16 are set to prevent playing track Mid-Rates unless SC- is held for at least 0.5 seconds - SF set with a toggle function so that it must turned on-off-on before THR is active - S1 used as volume control - SHs used to reset timer - SF is used to start/stop Telemetry log
Ultra Stick 40
- Stick ARF with 58” wingspan, OS 70 Surpass engine, and flaps - Timers 1 & 2 set with THs - SC is used for Triple Rates and Exponential for RUD, AIL and ELE. Expo set at 30%. Rates at 100%, 80%, and 60% - Mix with SB is used for Crow SB↑; AIL-FLP combination SB-; and Normal flight SB↓ with Flaps on the LS using a curve and CS 1 and CS2 - THR is set on a curve to allow for THR Cut. - Mix using SG is used for THR-ELE mix providing up to 15% ELE as THR increases - Mix using SE is used for THR-RUD mix providing up to 10% right rudder as THR increases - Mix using SH is THR cut - CHL 3, 4, 6, 7 are inverted - CS3 is set to prevent playing track Mid-Rates unless SC- is held for at least 0.5 seconds - SF is used a Safety throttle for THR. - S1 controls speaker volume - SHs resets timer - CS3 and CHL 16 are set to prevent playing track Mid-Rates unless SC- is held for at least 0.5 seconds
Ultra Stick Gas - Stick ARF with 76” wingspan, DLE 20cc gas engine, and flaps - Timers 1 & 2 set with THs - SC is used for Triple Rates and Exponential for RUD, AIL and ELE. Expo set at 30%. Rates at 100%, 80%, and 60% - Mix with SB is used for Crow SB↑; AIL-FLP combination SB-; and Normal flight SB↓ with Flaps on the LS using a curve and CS 1 and CS2 - THR is set on a curve to allow for THR Cut. - Mix using SG is used for THR-ELE mix providing up to 15% ELE as THR increases - Mix using SE is used for THR-RUD mix providing up to 10% right rudder as THR increases - Mix using SH is THR cut - CHL 3, 4, 6, 7 are inverted - CS3 is set to prevent playing track Mid-Rates unless SC- is held for at least 0.5 seconds - SF is used a Safety throttle for THR. - S1 controls speaker volume - SHs resets timer - CS3 and CHL 16 are set to prevent playing track Mid-Rates unless SC- is held for at least 0.5 seconds - SD set up for background music
P-40 Warhawk - Electric foam model with 55.25” wingspan, retracts and flaps - Timers are set with CS1 which does not start the timers until THR is on at least 5% - Flaps are a mix on CHL 5 - SC is used for Triple Rates and Exponential for RUD, AIL and ELE. Expo set at 30% except THR which is 20%. Rates at 100%, 80%, and 60% - CHL 1, 2, 4, and 6 are Inverted - Mix with SB is used for Flaps with 2 second slow feature - Mix using SG is used for THR-ELE mix providing up to 15% ELE as THR increases - Mix using SE is used for THR-RUD mix providing up to 10% right rudder as THR increases - CS2 and CHL 7 are set to prevent playing track Flaps 50% unless SB- is held for at least 0.5 seconds - CS3 and CHL 16 are set to prevent playing track Mid-Rates unless SC- is held for at least 0.5 seconds - SF set with a toggle function so that it must turned on-off-on before THR is active - S1 used as volume control - SA control start/stop Log of Telemetry - SHs used to reset timer - SF is used to start/stop Telemetry log
P-47D Thunderbolt - Balsa/Ply model with 63” wingspan, Saito 150 4-Stroke, retracts and flaps - Timer 1 & 2 set with THs - THR is not set up with a curve - CS1 is set for the bomb drop on CHL 9 - SC is used for Triple Rates and Exponential for RUD, AIL and ELE. Expo set at 30%. Rates at 100%, 80%, and 60% - Mix using SB is used for Flaps with rates at -125%, -50% and 25%. Slow 1 second. - Mix using SG is used for THR-ELE mix providing up to 15% ELE as THR increases - Mix using SE is used for THR-RUD mix providing up to 10% right rudder as THR increases - Mix using SH is THR cut - CHL 2 and 5 are inverted - Custom Switches CS3 and CS4 are set as mixes to delay reading of track in mid positions unless mid position for Flaps and Rates are held for 0.5 seconds. - S1 used as volume control - SH↓s used to reset timer (in addition to THR Cut) - SD controls background music - SA↑ raises Landing Gear and starts Telemetry Log
P-51D Mustang - Electric foam model with 57” wingspan, retracts and flaps - Timers are set with CS1 which does not start the timers until THR is on at least 5% - Flaps are a mix on CHL 5 - SC is used for Triple Rates and Exponential for RUD, AIL and ELE. Expo set at 30% except THR which is 20%. Rates at 100%, 80%, and 60% - CHL 2, 4, and 5 are Inverted - Mix with SB is used for Flaps with 2 second slow feature - Mix using SG is used for THR-ELE mix providing up to 15% ELE as THR increases - Mix using SE is used for THR-RUD mix providing up to 10% right rudder as THR increases - CS2 and CHL 6 are set to prevent playing track Flaps 50% unless SB- is held for at least 0.5 seconds - CS3 and CHL 16 are set to prevent playing track Mid-Rates unless SC- is held for at least 0.5 seconds - SF↓t set with a toggle function so that it must turned on-off-on before THR is active - S1 used as volume control - SA control start/stop Log of Telemetry - SH↓s used to reset timer - SF is used to start/stop Telemetry log - SD controls background music
Messerschmitt Bf109F - Electric foam model with 42.5” wingspan and flaperons - Timers are set with CS1 which does not start the timers until THR is on at least 5% - SC is used for Triple Rates and Exponential for RUD, AIL and ELE. Expo set at 30% except. Rates at 100%, 80%, and 60% - CHL 1 is Inverted - Mix with SB is used for Flaperons with 2 second slow feature - Mix using SG is used for THR-ELE mix providing up to 15% ELE as THR increases - Mix using SE is used for THR-RUD mix providing up to 10% right rudder as THR increases - CS2 and CHL 15 are set to prevent playing track Flaps 50% unless SB- is held for at least 0.5 seconds - CS3 and CHL 16 are set to prevent playing track Mid-Rates unless SC- is held for at least 0.5 seconds - SF↓t set with a toggle function so that it must turned on-off-on before THR is active - S1 used as volume control - SA control start/stop Log of Telemetry - SH↓s used to reset timer - SF is used to start/stop Telemetry log
F4F Wildcat
- Electric foam model with 38” wingspan and flaperons - Timers are set with CS1 which does not start the timers until THR is on at least 5% - SC is used for Triple Rates and Exponential for RUD, AIL and ELE. Expo set at 30% except. Rates at 100%, 80%, and 60% - Mix with SB is used for Flaperons with 2 second slow feature - Mix using SG is used for THR-ELE mix providing up to 15% ELE as THR increases - Mix using SE is used for THR-RUD mix providing up to 10% right rudder as THR increases - CS2 and CHL 15 are set to prevent playing track Flaps 50% unless SB- is held for at least 0.5 seconds - CS3 and CHL 16 are set to prevent playing track Mid-Rates unless SC- is held for at least 0.5 seconds - SF↓t set with a toggle function so that it must turned on-off-on before THR is active - S1 used as volume control - SA control start/stop Log of Telemetry - SH↓s used to reset timer - SF is used to start/stop Telemetry log
Reaktor 3D - Electric foam model with 31.5” wingspan - Timers are set with CS1 which does not start the timers until THR is on at least 5% - SC is used for Triple Rates and Exponential for RUD, AIL and ELE. Expo set at 30% except. Rates at 70%, 50%, and 350% - Mix using SG is used for THR-ELE mix providing up to 15% ELE as THR increases - Mix using SE is used for THR-RUD mix providing up to 10% right rudder as THR increases - CS3 and CHL 16 are set to prevent playing track Mid-Rates unless SC- is held for at least 0.5 seconds - SF↓t set with a toggle function so that it must turned on-off-on before THR is active - S1 used as volume control - SA control start/stop Log of Telemetry - SH↓s used to reset timer - SF is used to start/stop Telemetry log
Piper Cub - Balsa/Ply model with 76” wingspan and Flaperons - Timer 1 & 2 set with THs - THR is set up with a curve to take advantage of full servo movement - SC is used for Triple Rates and Exponential for RUD, AIL and ELE. Expo set at 30%. Rates at 100%, 80%, and 60% - Mix using SB is used for Flaperons with rates at 100%, 75% and 50%. Slow 2 seconds. - Mix using SG is used for THR-ELE mix providing up to 15% ELE as THR increases - Mix using SE is used for THR-RUD mix providing up to 10% right rudder as THR increases - Mix using SH is THR cut - CHL 2 and 4 are inverted - Custom Switches CS2 and CS3 are set as mixes to delay reading of track in mid positions unless mid position held for 0.5 seconds. - S1 used as volume control SHs used to reset timer (in addition |
|
|||||||||||||||||||
Comments
RSS feed for comments to this post